STP SUPER SEAL Airconditioning stop leak kit for R-134a airco systems.
Within reason, this product will repair the SMALL hard to find porous A/C leaks on, Evaporator , Condenser, Compressor, Accumulator, Receiver/Dryer O-Rings, Gaskets and Hoses
Important!!! Super Seal will not repair a visible hole or a split in any A/C components
How to use:
- Using the R134a refrigerant with the colour coded charging gauge ( e.g. MAC134UK; AF1UK, for retail or AF6UK, with QC1HD for trade) connect the quick coupler to the Low-Side Charging Port, take a pressure reading then add enough refrigerant to enable the compressor to engage, “click in”. Step 2: Swap to the Super Seal product, connect again to the same low-side port and add the whole can, shake well until empty then disconnect the Super Seal. Step 3: Immediately reconnect the quick coupler of the Interdynamics R134a refrigerant with the colour coded charging gauge as mentioned above and carry on recharging/topping-up the system with refrigerant until the gauge needle stabilises in the BLUE zone.
Please note:
- THE SUPER SEAL PRODUCT WORKS VERY QUICKLY, SO TO PREVENT THE SUPER SEAL FROM SEALING THE CHARGING PORT THE SYSTEM MUST BE RECHARGED/TOPPED-UP IMMEDIATELY!
- IF YOU HAVE A VISIBLE HOLE OR A SPLIT IN ANY COMPONENT IT WILL NEED TO BE REPLACED, THE SYSTEM PRESSURE TESTED, VACUUMED AND RECHARGED USING PROFESSIONAL EQUIPMENT.
- Packaging may vary.
